Resources
Associations
-
The Association of Consulting Engineering Companies (ACEC) is a not-for profit organization that has been the voice of Canadian consulting engineering companies since it was founded in 1925.
We represent the commercial interests of businesses that provide professional engineering services, to both the public and the private sector. Our members' services include planning, designing and implementing all types of engineering projects, and providing independent advice and expertise in a wide range of engineering-related fields.
-
Founded in 1972, Interior Designers of Canada (IDC) is the national advocacy association for the interior design profession. As the national advocacy body, IDC represents more than 5,000 design professionals including fully qualified interior designers and related professionals.
-
PMI is the world’s leading projectmanagement organization, offering certifications, training, events, and resources for professionals and organizations.
-
Upholding the standard of practice for architecture and licensed interior design in Alberta.
The Alberta Association of Architects (AAA) is a self-governing professional association legislated by theArchitects Act. The AAA serves the public and its members by administering the standard of practice for the professions of architecture and interior design in Alberta.
“Architect” and "Licensed Interior Designer" are restricted titles under the Architects Act, meaning only registered or licensed members of the Association, with appropriate education, practical experience and certification may use the title Architect or Licensed Interior Designer or any of their variations.
https://www.aaa.ab.ca -
This Architects Act of Prince Edward Island is designed to protect the safety of Islanders by regulating the profession and clearly outlining when architectural expertise is required for the design of buildings.
AAPEI is the self-regulating body formed to administer and regulate the practice of Architecture in the province of PEI. The principal objective is to protect users and potential users of professional architecture services by governing its licensed members, including holders of Certificates of Practice and Temporary Licences, so the public can be confident AAPEI members are appropriately qualified and meet the legal requirements to practise architecture.
-
The Architects’ Association of New Brunswick (AANB or the Association) is a corporate self-regulating body, established in 1933, for the purpose of advancing and maintaining the standards of architecture in New Brunswick, for governing and regulating those offering architectural services and for the safeguarding of members of the general public and the profession. The AANB Architects Act & By-Laws, which are a statute of the Government of New Brunswick, establishes the guidelines for membership in the Association and the practice of architecture in New Brunswick.
Registered members of the AANB are highly-trained professionals who have successfully completed a university degree, mandatory practical training/experience and an extensive architectural registration examination process. Members are then granted the right to call themselves an ‘Architect’ and use the designation ‘AANB.’
-
The AIBC is an independent, professional self-regulatory body established in 1920 by provincial statute: the Architects Act. In the interest of the public, the Architectural Institute of British Columbia regulates the profession of architecture through a responsive regulatory framework.
-
The Association of Architectural Technologists of Ontario is a registered not for profit organization founded in 1969. We are a government of Ontario legislated, self-governing body that regulates the use of titles through the Association of Architectural Technologists of Ontario Act, 1996. AATO exerts an influence on the entire field of Architectural Technology, from basic education to senior levels of practice; a common meeting ground for improved communication and dissemination of specific knowledge within the field of Architectural Technology.
-
The Manitoba Association of Architects (MAA) is a self-governing professional association, mandated by the Province of Manitoba under The Architects Act to regulate the practice of architecture in the province.
In fulfilling its mandate, the MAA serves to protect the public interest and advance the profession of architecture. The MAA works with its membership and other stakeholders to establish high entry standards to the profession and maintain high standards of practice. Members are governed by strict principles of ethical and professional conduct. The MAA has been a pioneer in Canada in establishing mandatory continuing education requirements for its membership.
The MAA appoints representatives to a number of community organizations, including the Winnipeg Building Commission, the Historic Buildings Committee, the Manitoba Association of Architects/Winnipeg Construction Association Joint Committee, and various task groups. As well, the MAA makes annual contributions to the University of Manitoba Faculty of Architecture to help fund visits by guest lecturers and purchase books for the Faculty's library. The MAA is funded solely by membership fees.
-
The Newfoundland and Labrador Association of Architects is a not-for-profit organization that promotes architecture and the profession within the province. We work to bring awareness to the public and the industry with which we are involved, promote the values of architecture and our members, and develop excellence within our exciting profession.
The Association was registered in November 1949 and Incorporated by Act of the legislature in May 1956. The Association is administered by an Executive Council consisting of six members.
-
On November 6, 2001, Bill 11 (the Architects Act) received assent in the Northwest Territories Legislative Assembly and the NWT Architectural Society, which had acted in the general interest of architects since 1986, was transformed into the Northwest Territories Association of Architects, a fully self-regulating professional association. On November 23, 2001, NWTAA became the 11th signatory to the Canadian Architectural Agreement, allowing for reciprocity between the provinces and the NWT, and set standards for education, experience and examination for NWTAA members.
The Northwest Territories Association of Architects is mandated by the Architects Act to regulate the practice of architecture, govern the profession, and establish and maintain standards of knowledge, skill, care and professional ethics among authorized practitioners to serve and protect the interests of the public.
-
The Nova Scotia Association of Architects (NSAA) is a self-governing professional association established in 1932, and mandated by the Province of Nova Scotia under The Architects Act to regulate the practice of architecture in the province.
The NSAA serves to protect the public interest and advance the profession of architecture. The NSAA works with its membership and other stakeholders to establish high entry standards to the profession and maintain high standards of practice. Members are governed by strict principles of ethical and professional conduct, which are detailed in the NSAA By-Laws and Canons of Ethics. The Association assists various governmental bodies in drafting legislation as it might affect architects, their clients, or the public.
-
The Ontario Association of Architects is the regulatory body responsible for registering and licensing all architects legally entitled to practice the scope of architecture in the Province of Ontario, Canada, founded in 1889.
The OAA is governed by a Council of 15 Architects elected by the membership, and up to five members of the public appointed by the Province of Ontario. Council sets policy direction for the Association. Its work is assisted by more than 300 volunteers working on numerous committees, task groups and 14 Local Architectural Societies throughout Ontario, as well as by an Association staff of 32.
-
The Ordre des architectes du Québec is the professional order governing the practice of architecture in the province of Quebec, whose main function is to ensure the protection of the public. The practice itself is currently codified by the Quebec Professional Code and the Architects Act.
With a view to protecting the public, the OAQ ensures the acquisition and maintenance of a high level of competence among its members with a view to creating a quality built environment that is a source of pride and collective identity.
-
The Royal Architectural Institute of Canada (RAIC) is a not-for-profit, national organization dedicated to representing architects and architecture since 1907. The RAIC is the only national voice for excellence in the built environment in Canada focused on providing Canada’s architectural community with the tools, resources, and education to elevate their practice. The RAIC is committed to showcasing how design enhances quality of life, while advocating for important issues of society through responsible architecture. The RAIC’s purpose is to create a better world for all by empowering Canada’s architectural community. Through our work, the organization envisions a strong architectural community that is valued and empowered to create change. The RAIC’s national office is based in Ottawa with a growing federated chapter model. Current chapters and networks are based in British Columbia, Alberta, and Nova Scotia.
-
The Saskatchewan Association of Architects (SAA) is a self-governing professional association, mandated by the Province of Saskatchewan under The Architects Act, 1996 to regulate the practice of architecture in the province.
The association is governed by a Council of ten members: seven elected resident architects and two public appointees (one a university faculty member), and the Past-President. The association is also served by many dedicated volunteers among its members, including three standing committees (Practice, Education, and Communications committees) and those who act as representatives to a number of external professional organizations.
Architecture
Did You Know?
On May 11, 2022, Statslog Founder, Michael Copas received his award as an Honorary Member of the OAA at the 2022 Conference: “Inspiring Climate Action”. An Honorary Member is a person who has given valuable and distinguished service to the architectural profession or has scrupulously upheld the objects of the Association.
Construction
-
Backed by 18,000 member firms drawn from 63 local and provincial integrated partner associations, the Canadian Construction Association (CCA) is the national voice for Canada’s institutional, commercial, industrial, civil and multi-residential construction industry, giving voice to the public policy, legal and standards development goals of contractors, suppliers and allied business professionals working in, or with, our industry.
*Check out the Webinar Series—“Read Your Construction Contract”:https://www.cca-acc.com/best-practices-resources/read-your-construction-contract
-
CCDC documents are developed through a consultative process with representatives from all sectors in the construction industry. These consensus-based documents carry the endorsement of the four constituent national organizations. A lawyer from the Canadian Bar Association, construction law section also sits as an ex-officio member of the committee.
-
The Construction Management Association of America is an industry association dedicated to the practice of professional construction management. CMAA represents more than 23,000 members including federal/state/local government and private sector owners, construction consultants, technology suppliers, academia, and legal organizations all with a common goal: to improve our nation's infrastructure.
-
Following the growth of the Association, in 1967, the association established the College of Fellows to formally recognize outstanding contribution by members towards the improvement of the design + construction community, and the enhancement of the association. Fellowship is an honour conferred on members singled out for their dedication, service and long-standing contribution towards the betterment of the design + construction community.
Our mission is to educate, connect and lead the design and construction community to achieve excellence in project delivery. Our vision is to be the trusted resource for the construction community.
-
Through collaboration and partnership, COAA’s owner-led membership brings together the heavy industrial construction industry to steward shared goals and priorities critical to a competitive and thriving Alberta. COAA offers Project Best Practices designed to improve performance in industrial construction projects across the province.
-
Working with a General Contractor drastically reduces liability for Owners; General Contractors offer insurance, bonding, and safety qualifications; and. They are trusted advisors from start to finish, with a goal of avoiding change orders in the process.
-
The OGCA is the pro-active voice for all general contracting issues across the Province of Ontario. The OGCA has diligently worked to build Ontario by directly assisting our members to deliver construction excellence in the Industrial, Commercial and Institutional Sectors. Our members include small, medium and large firms representing both union and open-shop contractors. Members account for approximately 70% of all of Ontario’s Industrial, Commercial and Institutional (ICI) projects and the majority of all Alternative Finance Projects (AFPs).
Publications
-
Award serves the special interests of architects, consulting engineers and construction industry professionals. It is the only media property in Canada to address the concerns of all five design/construction professions—architecture, construction, engineering, interior design and landscape architecture. Four times per year, this large-format magazine presents building industry professionals across Canada with well-researched, vital stories and updates on the people, projects and issues driving their industries.
Award is also a key source for information about the newest products and services available to building professionals and is a leading source for industry news.
Read the latest Digital Edition:
http://digital.canadawide.com/i/1521495-june-2024/0? -
Since 1952, Building magazine has been Canada’s #1 building and urban development publication – reaching key segments of the architecture, building design and built environment community. Each issue of Building magazine reaches more than 10,000 qualified industry professionals nationally.
Building magazine’s stories explore the critical topics, trends, challenges and strategies shaping modern innovative city building and urban development, bringing together all key built environment stakeholders around the table – architects and designers, engineers, property developers and builders, property, facility & building management, contractors, urban planners, consultants and government planners, commercial real estate professionals and users.
-
Construction Canada explores construction projects focused on challenges and solutions for architects, engineers and specification writers.
https://www.constructioncanada.net/archives/digital-editions
-
Construction Tech Review magazine features the latest viewpoint from vendors. Construction Tech Review is a print and digital magazine that provides knowledge network for Construction Tech technology and allows firm to learn about trending technologies that can help grow their business.
-
The National Building Code of Canada (NBC) 2020, developed by the Canadian Commission on Building and Fire Codes and published by the National Research Council of Canada, sets out technical requirements for the design and construction of new buildings, as well as the alteration, change of use and demolition of existing buildings.
Statslog was featured in Award Magazine’s August 2016-2017 issues covering software for architecture, engineering and construction—and how it’s faster and stronger than ever.
Articles: Get with the Program | Tools of the Trade
Programs + Continuing Studies
In order to practice Contract Administration, it requires a specific set of educational qualifications and practical experience. The following resources can help you get started:
Architectural Technology Programs:
Professional Development
-
For professionals who have mastered the competencies in the Contract Management Body of Knowledge (CMBOK)™ . NCMA's pinnacle certification is accredited by the ANSI National Accreditation Board (ANAB) and based on the internationally recognized Contract Management Standard® .
Online | Certification
https://ncmahq.org -
Our Construction Administration course focuses on the rights and obligations of the parties under a standard construction contract. Examine the practical application of clauses related to instructions, changes, progress payments, holdbacks, and completion certificates.
Online | Certificate
George Brown College, Toronto ON
https://coned.georgebrown.ca/courses-and-programs/construction-administration-online -
This course explores the issues and responsibilities that need to be addressed during the construction phase of a building project. Construction Contract Administration (CCA) is crucial to getting a project built. In this module, participants learn about the key parties in a construction project and their related responsibilities. You will become familiar with construction contracts and the rules of the game, including methods of project delivery and agreements between various parties. Also covered are the recommended practices and procedures for administering the construction contract from project inception, through the construction phase and finally, post-construction.
This is an online, self-directed course, and you can work through the modules at your own pace.
1-2 Months (Online) | Certificate
University of Toronto Continuing Studies, Toronto ON
https://learn.utoronto.ca/programs-courses/courses/3721-construction-contract-administration-and-general-review -
The construction industry is one of the largest economic driving forces in Alberta and Canada.
The University of Alberta’s Construction Management & Administration Certificate explores the planning, technical, financial, and legal aspects of the construction business to allow learners to develop and expand their managerial skills and advance their careers. This program will be of value to practising construction professionals and those wishing to transition into the field.
If you work in the construction industry and are seeking a competitive edge to further your career, this Certificate will greatly increase your ability to compete and succeed. Courses in this program are accredited for the Gold Seal certification (Canadian Construction Association).
1 Year | Certificate
University of Alberta, Edmonton AB
https://ext.ualberta.ca/enroll/construction-administration -
Signing the contract is not the end, it’s the beginning. Once you or your organization have entered into a contract and put the management building blocks in place, you need to ensure that you are properly equipped to manage its implementation and handle all of the problems that may come up during its lifecycle.
In this OsgoodePD program, you will gain valuable insights from legal and contract management experts about assessing and managing risk, and tips for minimizing risk and maximizing performance. You will gain substantive knowledge and the practical skills needed to execute an efficient, and cost-effective contract management process. This intensive, five-day certificate will give you the tips and strategies you need to address some of the most challenging and complex situations that can negatively impact your contract management process.
5 Days (in-person) | Certificate
York University | Osgoode
Toronto, ON
https://osgoodepd.ca/professional-development/certificates/contract-management-for-construction-and-infrastructure-projects/ -
The PMP acknowledges candidates skilled at managing the people, processes, and business priorities of professional projects. PMI, the world’s leading authority on project management, created the PMP to recognize project managers who have proven they have project leadership experience and expertise in any way of working.
To obtain PMP certification, a project manager must meet certain requirements and then pass a 180-question exam. The PMP exam was created by project leaders for project leaders, so each test question can be related to real-life project management experiences.
Certification
Project Management Institute
https://www.pmi.org/certifications/project-management-pmp
Liability Insurance for Architects
Pro-Demnity Insurance provides Ontario’s architectural practices with professional liability insurance in accordance with the Architects Act—to protect and defend architecture practices from potential financial exposure of claims.
-
As an insurance company, it is regulated by the Financial Services Regulatory Authority (FSRA) of Ontario and tribunalized by Lloyd’s of London. In addition to fulfilling its mandatory role, Pro-Demnity provides affordable and accessible:
INSURANCE SOLUTIONS
increased limits up to $10,250,000;
competitive pricing on excess insurance;
spike-up on annual practice limits for coverage of a single project;
unique Retirement from Practice Program; and
exceptional quality in liability benefits and coverage for architectural firms.
RISK EDUCATION
education on managing and mitigating risks associated with the practice and profession of architecture; and
timely learning on current topics of concern to architects.
RISK SERVICES
Customized, confidential one-on-one risk support to architectural practices and their employees.
Visit https://prodemnity.com/ for more information.
